亚洲激情视频网站-亚洲激情视频-亚洲激情区-亚洲激情欧美激情-黑白配hd视频-黑暗体操

Home News Design of disposable syringe

Design of disposable syringe

Time:2020-06-18 17:07:13 Hots:2419

The disposable injection syringe is composed of a syringe with a small hole at the front end and a matched piston core rod. The ejector is used to inject or extract a small amount of liquid into areas inaccessible by other methods. When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with syringes and syringes is called injection.The disposable syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases. Among intravenous drug users, the spread of diseases, especially HIV and hepatitis, is related to the reuse of needles and syringes.The injector syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases.Test principle of infusion bag permeability tester: designed based on the principle of differential pressure method, the pre-treated sample is placed between the upper and lower test chambers to form a constant differential pressure on both sides of the sample. Under the action of the differential pressure, the gas penetrates from the high-pressure chamber through the film to the low-pressure chamber, monitors the pressure change of the low-pressure chamber, and calculates the barrier parameters of the tested sample.When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with disposable syringes and syringes is called injection.

The disposable injection syringe is composed of a syringe with a small hole at the front end and a matched piston core rod. The ejector is used to inject or extract a small amount of liquid into areas inaccessible by other methods. When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with syringes and syringes is called injection.


The disposable syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases. Among intravenous drug users, the spread of diseases, especially HIV and hepatitis, is related to the reuse of needles and syringes.


The injector syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases.


Test principle of infusion bag permeability tester: designed based on the principle of differential pressure method, the pre-treated sample is placed between the upper and lower test chambers to form a constant differential pressure on both sides of the sample. Under the action of the differential pressure, the gas penetrates from the high-pressure chamber through the film to the low-pressure chamber, monitors the pressure change of the low-pressure chamber, and calculates the barrier parameters of the tested sample.


When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with disposable syringes and syringes is called injection.


Follow&Consult

主站蜘蛛池模板: 国产 高清 无码 中文 | 国产精品XXXXX免费A片 | 日本人奶水中文影片 | 久久精品亚洲AV高清网站性色 | 亚洲一区综合图区 | 男人一生要读的书 | 蜜柚视频在线观看全集免费观看 | 全肉高H短篇合集 | 99爱免费视频 | a级成人免费毛片完整版 | 97精品国偷拍自产在线 | 日本无码毛片一区二区手机看 | 一本到道免费线观看 | 日韩欧美高清一区 | 啪啪漫画无遮挡全彩h网站 啪啪漫画无遮挡全彩h同人 | 欧美亚洲另类图片 | 亚洲国产在线精品国自产拍五月 | 国产日韩欧美另类 | 亚洲熟女片嫩草影院 | 夜夜骑夜夜欢 | 亚州精品永久观看视频 | 在线观看中文字幕码2021不用下载 | 国产精品久久久精品a级小说 | 菠萝菠萝蜜视频在线看1 | 成人免费精品视频 | 99国产精品偷窥熟女精品视频 | 久久九九日本韩国精品 | 双手绑在床头调教乳尖 | 亚洲精品美女久久777777 | 欧洲最大无人区免费高清完整版 | 色WWW永久免费视频首页 | 中文字幕无线观看不卡网站 | 国语92电影网午夜福利 | 俄罗斯12一15处交 | 九九热在线视频 | 国产午夜精品一区二区理论影院 | 十次啦中文网 | 国产精品亚欧美一区二区三区 | 成年色黄APP下载 | 双性大乳浪受噗呲噗呲h总 双性被疯狂灌满精NP | 午夜影院费试看黄 |